The series of Clay Modeling Film, originally developed by TOOLS INTERNATIONAL Corp, which is mainly used for the shape confirmation of exterior/interior, checking highlights, and qualification studies in clay model fabrication process.
|Black MetallicⅡ||CMF-04002||W930mm×L20m Roll|
|White MetallicⅡ||CMF-07002||W930mm×L20m Roll|
|Matte BlackⅡ||CMF-13002||W930mm×L20m Roll|
|Steel GrayⅡ||CMF-15002||W930mm×L20m Roll|
|Machine SilverⅡ||CMF-17002||W930mm×L20m Roll|
|Solid WhiteⅡ||CMF-22002||W930mm×L20m Roll|
|Flare RedⅡ||CMF-24002||W930mm×L20m Roll|
|Dark GrayⅡ||CMF-25002||W930mm×L20m Roll|
|Nova GrayⅡ||CMF-27002||W930mm×L20m Roll|
|Champagne SilverⅡ||CMF-28002||W930mm×L20m Roll|
It is colored film frequently used on the production site. You do not have to paint the surface and can use it as is. After soaking the film in water and peeling off the back paper, then apply the film on clay surface.
If clay surface is water-sprayed beforehand, the adjustment of the position of application can be done easily and is convenient. You can gently remove the air bubbles and moisture with a rubber spatula and apply the film on clay surface with wiping moisture with paper cloth. The finish even comes out nicely if wiping off all water marks and drops of water with paper cloth.
It is clear transparent film. Paint the surface of film with the lacquer type paint. After applying the paint and the film gets softened by the paint, soak the film in water and peel off the back paper, then apply the film on clay surface.
Follow the instruction manual and use Clay Modeling Film correctly with following points.
If leaving the cut film as is for a while, the air pocket between the film and clear protective cover causes discoloration and deformation.
After cutting the film in roll width, cut the sheet into necessary size. We recommend to cut the film in straight line in roll width. Otherwise, the air coming in from the cut layer might cause discoloration and deformation.
The air easily comes in between the film and clear protective cover. The air pocket might cause discoloration and deformation.
If not leaving the unused sheet of film tight enough in roll, the air comes in between the film and clear protective cover or it might cause discoloration and deformation. We recommend to roll it back very tight and tape with crepe tape at each end of film, then wrap with plastic bag and put it back into the box.
Clay Modeling Film is considered as a delicate product. Your understanding and cooperation on use of this product is appreciated.